A SERVICE OF

logo

Open as PDF
next previous
-8-
9. Remove ame adjustment rings from inside the burners.
10. Carefully position the logs on the log plate according to the illustrations provided below (see
Figures 6-10). The pins that protrude upward from the log plate and fuel compartment door
will help you to position the logs correctly. Log #1 will t on a pin that protrudes from the door.
Log # 2 will t on the pin on the log plate. Log #3 will t on a pin on the log plate also. Log #4
ts on a pin that is on the top surface of log #3. Finally Log #5 ts on a pin that protrudes from
the top surface of log #4. It is essential for the proper functioning of this appliance that the logs
be placed as shown in the illustrations.
Step #1: Table
Step#3:AddingBurnerAssembly
Step#2:AddingFirePit
Step#4:AddingLogPlate
Figure4
Steps for Assembling Fire Pit