1 - 6 Document #98219100
Requirements to Unload Truck
When your dyno arrives, you must provide
equipment to unload the dynamometer from the
truck, with skids or forks a minimum of 6 inchs
wide by 6 feet long. It must be capable of lifting
and moving at least 8000 pounds (3642 KG).
The dyno has 2 C-Channels that run lengthwise
along the bottom of the dyno. Unload the
dynamometer using these channels.
Pit Requirements
You must provide a dyno pit. Dyno pit
dimensions are provided in the technical drawing
CAR DYNO FINISHED PIT DIMENSIONS. Be
sure to contact your local contractor for code
specifications before digging a pit. After digging
the pit you will pour the concrete and set 3 anchor
bolts. The anchor bolts are included with your
dynamometer. Follow the technical drawings
CAR DYNO FINISHED PIT DIMENSIONS for
placement of anchor bolts.
