E&J-Everest&Jennings EJ777-2 Manual

A SERVICE OF

next previous

EJ777-2-INS-LAB-RevA10•EJ777-2TransportChair 23

7 TROUBLESHOOTING

Continual use of your Transport Chair necessitates maintenance, especially if the

factory-set adjustments have been altered. The following troubleshooting guide lists

several common problems that may occur, and offers corrective actions for each. If

you are unsure of the solution or unable to diagnose the problem, do not hesitate to

ask your Graham-Field dealer for assistance.

Nutsand/orboltsmaybeloose.Ifso,tighten.

Boltsshouldbesnug.

Rearwheelsand/orcastersmaybeadjusted

improperly.Ensurethatbothcasters

aremountedinidenticalpositions.

Castersorstem(s)maybeadjustedimproperly.

HaveyourGFdealercorrectadjustment.

loosenessintransportchair

squeaks/rattles

casterflutter

sluggishturning

chairveersleft

chairveersright

SYMPTOM

PROBABLECAUSEAND

CORRECTIVEACTION

 

 

   

   

Note: Use only Everest & Jennings replacement parts. A Transport Chair replacement

parts list is available at www.grahamﬁeld.com to assist in the ordering of parts.

CAUTION: A complete inspection of your Transport Chair, including mainte-

nance, servicing and safety checks, should be performed by a Graham-Field

dealer at least once every six months.

WARNING: Unauthorized modiﬁcation or the use of non-Everest & Jennings replace-

ment parts could change the structure of the Transport Chair, void the warranty, and

create a hazardous condition, which could result in serious personal injury.