WARM & SERVE DRAWER INSTALLATION INSTRUCTIONS
3
30" WARMER DRAWER FRONT PANEL INSTALLATION INSTRUCTIONS
Drawer
Interior Panel
Drawer
Mounting
Panel
Drawer Wood Panel
(supplied by the customer)
Drawer Mounting Panel
Drawer Wood Panel
(supplied by the customer)
Front Panel Installation instructions:
First, install the drawer handle (if applicable) on the
wood panel.
11¼’’
30’’
Center line
Figure 1
Figure 2
Note: Wood panel should be ½’’ min. thick.
1. Remove the 5 screws located at position
A which are fixing the drawer mounting
panel to the drawer interior panel.
2. Place the drawer mounting panel on the
inside of the drawer wood panel as per fig-
ure 2. Fix the drawer wood panel (supplied
by the customer) to the drawer mounting
panel using the 4 wood screws supplied at
location B.
3. Reinstall this new assembly wood &
mounting drawer panel to the drawer
interior panel.
