A SERVICE OF

logo

Open as PDF
next previous
22
• Be sure the lid is closed.
• Plug cord into a live electrical outlet.
• Check fuse or reset circuit breaker.
•Open and close the lid, then push the Start/Pause touchpad.
• Turn both faucets on fully.
• Straighten inlet hoses.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
• Check fuse or reset circuit breaker.
• Open and close the lid, then press the Start/Pause touchpad. For your safety, the clothes washer
will not tumble or spin unless the lid is closed.
• Some cycles are designed to tumble then pause. This is normal.
• Press the Start/Pause touchpad to stop the washer.
•It may take up to 2 minutes for the lid lock mechanism to disengage.
•A locked lid may not unlock during a power outage.
• Clothes washer should be leveled properly as outlined in installation instructions.
• Check that the leveling leg lock nuts are tightened.
• Be sure rubber feet are installed on leveling legs.
• Weak floors can cause vibration and walking.
• The load may be unbalanced.
•For information on normal operating sounds, see page 23.
• The contrast may need to be adjusted. Select the Help option pad then “select preferences”.
Touch “change monitor contrast”. Using the arrows move the block to the left or right to
improve the visual quality of the touchscreen.
• See Cleaning the Interior, page 19.
CHECK THESE POINTS IF YOUR MAYTAG NEPTUNE
®
TL CLOTHES WASHER...
For further assistance, call Maytag Customer Service toll-free at 1-888-4-MAYTAG (1-888-462-9824).
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
Lid Locked Shut;
Will Not Open
Freshening
Your Washer
Is Noisy
Won’t Fill
Won’t Tumble
The Touchscreen is
Fading
In an effort to better understand what is occurring with your Maytag Neptune
®
TL Washer, pop-up windows may appear.
These windows are there to inform you of what is happening and what actions may need to be taken. Examples of these
pop-up windows are below.
save as a favorite
est. time:
your cycle
main wash
lid unlocked
hot wash
cold rinse
stain treat
24 min. wash
cotton
fabrics
OPTIONS
max extract spin
end chime medium
Auto Temp ON
The cycle is complete. The load
may now be removed.
ok
save as a favorite
hot wash
cold rinse
stain treat
24 min. wash
cotton
fabrics
OPTIONS
max extract spin
end chime medium
Auto Temp ON
Press "Start/Pause" or
change selections below.
Excess suds were detected
during recent cycles. Try using
low sudsing or less detergent.
See the help section on User's
Guide for more information.
ok
save as a favorite
est. time:
your cycle
main wash
lid locked
hot wash
cold rinse
stain treat
24 min. wash
cotton
fabrics
OPTIONS
max extract spin
end chime medium
Auto Temp ON
The washer is checking the lid
lock system and will unlock
shortly. This is normal.
ok
40
cycle
library
Home
stain
brain
favorite
cycles
set your
own cycle
A power failure occured during
the current cycle. Press
"Start/Pause" to continue this
cycle.
ok
After you have read the message, touch “ok” and the pop up window will disappear.
POP-UP WINDOWS