A SERVICE OF

logo

Two-sided Printing
41
Windows
Follow the Windows printing instructions beginning on page 33, but complete
the additional steps below before you start printing.
1. Click the
Page Layout
tab in the printer software.
2. Select
Auto
as your
2-sided printing setting
if you’ve installed the auto
duplexer, or
Manual
if you don’t have the auto duplexer.
Note:
When you use the Manual setting, the printer software will prompt you to reload
the printed pages as necessary.
3. If you’re printing on plain paper and you notice that ink smears or bleeds
through the page, click
Adjust Print Density
to reduce the print density and
increase the ink drying time.
Select Auto
or Manual
Art700Basics.book Page 41 Monday, July 7, 2008 4:13 PM