A SERVICE OF

logo

1-16
Setting Up the Scanner
CRESSON
Rev. C
A5 size CHAP1.fm
2/16/99 Pass 0
L
Proof Sign-off:
M. Fujimori _______
<leadername> _______
<editorname> _______
2. Insert one end of the interface cable into one of the scanner
SCSI connectors and press until the locks on both sides snap
in.
Note:
To connect the scanner to a SCSI device other than the
computer, the length of cable in the daisy chain must not exceed
6 meters; otherwise the system may not work properly.
To connect the scanner to a PC using SCSI-2, the length of the
cable must not exceed 3 meters.
3. Connect the other end of the cable to the SCSI port of your
computer or another SCSI device.
Note:
The SCSI port on the Macintosh is the larger port with the SCSI
icon over it.
4. Plug in the power cords of your computer, scanner, and other
external SCSI devices.
Note:
Before turning on your system, be sure to read “Power-on sequence”
following.
0
1
2
3
4
5
6
7
SCSI
ID
OPTION
TERMINATOR
SW
LOCK
UNLOCK
ON
OFF