Commands and function level table
The following table shows which commands are available at each
function level.
Command type Command name Command Function
Level
Execution
commands
Request ID ESC I B1
Request status ESC F B1
Request extended status ESC f Extended
Request condition ESC S B1
Start scanning ESC G B1
Data format
commands
Set data format ESC D B1
Set resolution ESC R B1
Set zoom ESC H B2
Set scanning area ESC A B1
Set color ESC C B1*
Set data order ESC K B5, A5
Image setting
commands
Set brightness ESC L B2
Set gamma correction ESC Z B2*
Download gamma table ESC z B4
Set sharpness ESC Q B4
Image processing
commands
Set halftoning mode ESC B B1*
Download dither pattern ESC b B4
Set color correction ESC M B3
Download color correction ESC m B4
Set auto area segmentation ESC s A5
Auxiliary commands Set scanning mode ESC g B4
Set line counter ESC d B4
Control option ESC e Extended
Eject document FF Extended
Initialize the scanner ESC @ B2
Abort scanning CAN B1
* The parameters for these commands differ by function level.
2-48 Command Usage
