A SERVICE OF

logo

Open as PDF
next previous
381295 V1.4V 10/06
21
Acquiring the Waveform
FUNC Open the FUNCTION menu.
Scope SetUp Exit
F1 F2 F3 F4
F1 Open the Scope Setup menu.
SCOPE SETUP
INPUT A: INPUT B:
■ DC □ AC ■ DC □ AC
VERTICAL MODE:
□ CHA □ CHB □ A&B
HORIZONTAL MODE:
■ NORM □ ROLL
MEASUREMENTS A:
■ DCV □ ACV □ OHM □ BZ
□ HZ □ RPM □ P/W □ DTY
Set Exit
F1 F2 F3 F4
Recording Slow Signals over a Long Period of Time
Highlight ROLL MODE.
F3 Set ROLL MODE.
F4 Exit.
The roll mode function supplies a visual log of waveform activity and is especially useful
when measuring lower frequency waveforms.
Note: ROLL MODE operates when the horizontal division is between 1s and 5s
Selecting AC-Coupling for INPUT A
Highlight AC for INPUT A.
F3 SET
F4 Exit.