A SERVICE OF

logo

Memory 57
9
Replace the memory board retention bracket, hooking the tab over the
edge of the electronics bay and replacing the screw in the back panel.
10 Close the case. (See “Closing the case” on page 31.)
11 Reconnect the peripherals and the power cord, then turn on the server.
Installing memory
The SDRAM DIMMs supported by your system board conform to the following
standards:
64 MB, 128 MB, 256 MB, 512 MB, and 1 GB ECC DIMMs
PC100-compliant, registered, parity, ECC SDRAM
8506284.book Page 57 Thursday, July 13, 2000 11:43 AM