User manual - GOLDMUND MIMESIS 24 UNIVERSAL PREAMPLIFIER | P 15
3
3.2
OPERATING THE MIMESIS 24 UNIVERSAL PREAMPLIFIER
REMOTE CONTROL(contd.)
In the TEST mode, Leds of the front panel indicate the speaker selection:
In Multi-channel mode, this is the meaning of the Leds:
• MODE and BALANCE (ENTER) on: indicates a Front selection
• CTRL and MUTE on: indicates a Rear selection
• IN2 on: means a left speaker (either front or rear)
• IN6 on: means a right speaker (either front or rear)
• IN4 on: Front or Rear Center
• IN3+IN4+IN5+MODE+BALANCE(ENTER)+CTRL+MUTE: Subwoofer
In 2-Channel mode:
• IN2 led on: Left channel
• IN6 led on: Right channel
The Mimesis 24 can be controlled by any RC5 coded remote-control emitter. The codes are
available upon request.
Most of the programmable transmitter units available have the capabilities to drive the
Mimesis 24 as a standard digital preamplifier, for all the specified functions.
CLEANING
Always disconnect the power cord from the wall socket before cleaning your Preamplifier.
To clean the external metal of the Preamplifier, always use a clean, soft, damp cloth. Dampen
with water or a mild detergent solution. Avoid abrasive or harsh cleansers (eg. products
containing sodium carbonate).
The identification plates are gold plated. Simply clean them with a soft cloth, without any
chemical solution.
3.3
