43
ENGLISH
OPERATION USING EXTERNAL DEVICES
-----------------------------
Device operation
You can decide whether external devices should
react to your television's remote control.
1 Press
»I«, use »
C
«, »
D
«, »
B
« or »
A
« to
select the preset
»HDMI1« or »HDMI2« and
press
»OK« to confirm.
2 Open the menu with
»M«.
3 Select the menu item
»SOURCE SETUP« with
»
C
« or »
D
« and press »OK« to confirm.
– The
»SOURCE SETUP« menu appears.
4 Select the line
»Remote Control« with »
C
«
or
»
D
«.
5 Select the type of operation (
»RC
Passthrough
«, »Deck« or »Tuner« with »
B
«
or
»
A
«.
Notes:
7
»RC Passthrough« can be used for all devices.
»Deck« and »Tuner« can be selected in ac-
cordance with the external device which
has been connected.
7
Try out which type of remote control opera-
tion the external device reacts to the best.
7
Read about the scope of functions of the
DIGILINK-compatible device in the respec-
tive operating manual.
6 Press
»M« to end the setting.
Switching the device to standby
This option switches the external device to
standby.
1 Press
»I«, use »
C
«, »
D
«, »
B
« or »
A
« to
select the preset
»HDMI1« or »HDMI2« and
press
»OK« to confirm.
2 Open the menu with
»M«.
3 Select the menu item
»SOURCE SETUP« with
»
C
« or »
D
« and press »OK« to confirm.
– The
»SOURCE SETUP« menu appears.
4 Select
»Device Standby« with »
C
« or »
D
«
and press
»OK« to confirm.
– The external device switches itself off.
Source
HDMI1
GRUNDIG DVD
Remote Control
RC Passthrough
Device Standby
Exit
Back
SOURCE SETUP
DIGILINK
20.09.2010
15:46
