32
• Press LOG/CFM to save the change. The new
selected option will be displayed on the LCD.
Alternatively, press CAL to exit without saving
the changes.
SET THE DATE
The HI 98713 turbidimeter has a built-in real
time clock (RTC). The RTC time is used to generate
a unique time stamp for each recorded value and to
automatically store the last calibration date. The
current time can be displayed on the LCD when the
instrument is in idle mode.
• To set the current date, press CAL when set date
panel is displayed. The date format is
YYYY.MM.DD. The last two digits of the year
value and “CFM” tag will start blinking.
• Press the UP or DOWN keys to set the year
value.
• Press LOG/CFM or READ
to start editing the
month value. The month value will start
blinking.
• Press the UP or DOWN keys to set the month
value.
• Press LOG/CFM or READ
to start editing the
day value. The day value will start blinking.
• Press the UP or DOWN keys to set the day
value.
Note: To edit the year again, after the day was
set, press READ .
• Press LOG/CFM to save the new date. The new
date will be displayed on the LCD. Alternatively,
press CAL to exit without saving the changes.
