A SERVICE OF

logo

Technical Data
Maximum incoming water pressure 90 PSI
Recommended incoming water pressure 20-60 PSI
Maximum incoming hot water temperature 120
o
F*
Flow Rate 2.5 GPM
*To protect bathers from scalding, many municipalities require that the water heater be set below 120
o
F. There may also be local codes
concerning the maximum output temperature of the shower valve. Please know and follow all applicable local codes.
Installation Instructions
Install the screen washer between the handshower
and the hose. This will protect the handshower
from debris in the water line.
Depending on local water conditions, you may
need to occasionally remove and clean the screen
washer. UNDER NO CIRCUMSTANCES SHOULD THE SCREEN
WASHER
BE PERMANENTLY REMOVED.
From the function is guaranteed.
Eco spray
Normal spray
Soft spray