A SERVICE OF

logo

Steps to install the print server
hardware
Attach the print server to a 10Base-T (Ethernet) or 100Base-TX
(Fast Ethernet) local area network by plugging a network cable
into the RJ-45 connector on the rear end of the print server.
1.
Attach the print server to the printer by plugging the Universal
Serial Bus (USB) cable—shipped with the print server—into
the USB connector on the front end of the print server and into
the USB connector on the printer.
Caution! Unsupported USB Devices:
HP 4135A Jetdirect Connectivity Card
any USB hub
2.