Driver Autoconfiguration as an installable component by default for a typical installation and for a
custom installation.
Update Now
If you have modified the configuration of the HP LaserJet 5200L printer since installation, the driver
can be automatically updated with the new configuration in environments that support bidirectional
communication. To change the configuration automatically, complete the following steps:
1. On the Windows taskbar, click Start, and then click Printers. Right-click the printer, and then
click Properties.
2. In the Properties dialog box, click the Device Settings tab.
3. Under Installable Options, click Automatic Configuration.
4. In the drop-down box, click Update Now, and then click Apply.
NOTE The Update Now feature is not supported in environments where shared
Windows NT® 4.0, Windows 2000, or Windows XP clients are connected to Windows NT 4.0,
Windows 2000, or Windows XP hosts.
HP Driver Preconfiguration
HP Driver Preconfiguration is a software architecture and set of tools that you can use to customize
and distribute HP software in managed corporate printing environments. Using HP Driver
Preconfiguration, information technology (IT) administrators can preconfigure the printing and device
defaults for HP printer drivers before installing the drivers. For more information, see the HP Driver
Preconfiguration Support Guide, which is available at
www.hp.com/support/lj5200l.
Additional drivers
The following drivers are not included on the CD, but are available from www.hp.com/go/
lj5200l_software.
●
UNIX® model scripts
●
Linux drivers
8 Chapter 1 Printer basics ENWW
