A SERVICE OF

logo

Open as PDF
next previous
Chapter 2 Printing Tasks 101
Using the Stapler
Selecting the Stapler from the Control Panel
If your software does not support stapling, set it using the directions below.
1. Press M
ENUS
repeatedly until PAPER HANDLING appears.
2. Press I
TEMS
repeatedly until PAPER DEST= STANDARD OUT BIN * appears.
3. Press + repeatedly until PAPER DEST= OPTIONAL BIN x appears. (See pages 95
and 96
to choose the appropriate bin according to the mode you are using.)
Your network administrator may have changed the name of this bin. For example, it
may be called STAPLER.
4. Press S
ELECT
* to save your choice. An asterisk (*) appears next to your selection.