Hitachi Command Control Interface (CCI) User and Reference Guide 199
Table 4.15 Truth Table for Pairvolchk Group Status Display
Status of Each Volume in the Group
Option COPY* PSUE PDUB PFUS PSUS PFUL PAIR Group Status
See
Notes
below
TRUE x x x x x x COPY*
false TRUE x x x x x PSUE
false false TRUE x x x x PDUB
false false false TRUE x x x PFUS
false false false false TRUE x x PSUS
false false false false false TRUE x PFUL
false false false false false false TRUE PAIR
-ss TRUE x x x x x x COPY*
false TRUE x x x x x PSUE
false false TRUE x x x x PDUB
false false false x x TRUE x PFUL
false false false x x false TRUE PAIR
false false false TRUE false false false PFUS
false false false false TRUE false false PSUS
*COPY = COPY or RCPY
x = true or false (does not matter).
Notes:
The PFUL state is displayed as PAIR by all commands (except the -fc option of the
pairdisplay command), since PFUL indicates PAIR state with sidefile at the HWM.
The PFUS state is displayed as PSUS by all commands (except the -fc option of the
pairdisplay command), since PFUS indicates SUSPENDED state due to sidefile full.
The SVOL_PSUS state is displayed as SSUS by the pairdisplay command and other
commands.
This option will be able to use under condition when ‘pairvolchk -s’ has
“USE_OLD_VCHK” variable.
