4 - 5
Next, scan the Character to Trigger Delay barcode, then the 2-digit hex value for the ASCII character
that will trigger the delay ASCII Conversion Chart (Code Page 1252), page A-3.
To remove this delay, scan the Delay Length barcode, and set the number of steps to 0. Scan the Save
barcode using the Programming Chart inside the back cover of this manual.
Interfunction Delay
An interfunction delay of up to 495 milliseconds (in 5 ms steps) may be placed between the transmission
of each segment of the message string. Scan the Interfunction Delay barcode below, then scan the
number of 5 millisecond steps (0-99), and the Save barcode using the Programming Chart inside the
back cover of this manual.
To remove this delay, scan the Interfunction Delay barcode, then set the number of steps to 0. Scan
the Save barcode using the Programming Chart inside the back cover of this manual.
Intermessage Delay
An intermessage delay of up to 495 milliseconds (in 5 ms steps) may be placed between each scan
transmission. Scan the
Intermessage Delay barcode below, then scan the number of 5 millisecond
steps (0-99), and the Save barcode using the Programming Chart inside the back cover of this manual.
To remove this delay, scan the
Intermessage Delay barcode, then set the number of steps to 0. Scan
the Save barcode using the Programming Chart inside the back cover of this manual.
Delay Length
Character to Trigger Delay
Interfunction Delays
Prefix Scanned Data Suffix
1 2345STX HT CR LF
Interfunction Delay
2nd Scan Transmission1st Scan Transmission
Intermessage Delay
Intermessage Delay
