A SERVICE OF

logo

77
NS-42D510NA15 Insignia 42" LED TV
www.insigniaproducts.com
Specifications
Specifications are subject to change without notice.
Dimensions and weight
Screen
Display resolutions
Tuner
Inputs
Outputs
Audio
Power
Miscellaneous
Without stand
38.5 × 23.4 × 3.4 in. (97.7 × 59.4 × 8.7 cm)
20.0 lbs. (9.1 kg)
With stand
38.5 × 24.3 × 8.7 in. (97.7 × 61.7 × 22.1 cm)
20.5 lbs. (9.3 kg)
Screen size measured
diagonally
42 in.
Display type LED
Screen refresh rate 60Hz
Display resolution 1080p
Panel resolution 1920 (H) × 1080 (V)
Aspect ratio 16:9
Contrast ratio
(typical)–panel
3000:1
Dynamic contrast ratio–
list value
2,000,000:1
TV Brightness (minimum)
cd/m2
200 nits
Comb filter 3d y/c digital
Response time 6.5 ms
Horizontal viewing angle 178°
Vertical viewing angle 178°
HDMI suggested resolutions 1080p, 1080i, 720p, 480p, 480i
Component video suggested
resolutions
1080i, 720p, 480p, 480i
Analog NTSC
Digital ATSC, 8-VSB, Clear-QAM
HDMI
3 (side)
E-EDID and HDCP compliant
MHL-enabled and Roku Ready® (HDMI2/MHL jack)
Component video 1 (back)
Composite video
1 (back)
Shared with component Y
Shared audio (component
and composite)
Ye s
PC/VGA No
3.5mm PC/DVI audio input 1 (back)
DVI
1 (side)
HDMI3/DVI jack
USB
1 (side)
Supports JPEG and firmware upgrade
Antenna/Cable 1 (back)
Video No
Analog audio/Headphone 1 (side)
Digital audio 1 (optical) (back)
WiFi No
Ethernet No
DTS Tuning Package DTS Sound
Speakers
Number: 2
Watts per channel: 6W
Power consumption
On: 92W
Standby: <1W
Power input AC 120 V, 60Hz
OSD languages English, French, Spanish
INlink Yes
MHL-enabled and
Roku Ready®
Yes
HDMI2/MHL jack
Game Mode Yes
ENERGY STAR qualified Yes
Internet connectable No
TV base screws
Stand to TV screen:
M4 type (12 mm length) (2 pcs)
V-Chip (version 2.0) Yes
Sleep timer Yes
Channel labeling Yes
VESA mount (mm)
(horizontal × vertical)
200 × 200
VESA mount screws M6 type
Note
The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came
with the wall-mount bracket for screw
lengths.