4 5
2b. First remove the support tube (24) from the main frame
(1). Slide the assembled seat carriage onto the car-
riage tube (16). Re-assemble the support tube (24).
Attach the end cap (17) with screws (57) and rear car-
riage tube rubber stopers (66) with bolts (74, 75) and
washer (76).
2a. Attach the rear handlebar (22)
to the seat carriage (3) with the
flat washers (50) and screws
(79) provided. Connect the seat
cushions (9,10) to the seat car-
riage (3) with the washers (78)
and screws (80).
2b
2a
3. Attach pedals (30, 31). Axles of pedals are branded “L”
and “R.” The pedal marked “R” goes on the right hand
side of the bike and the one marked “L” on the left hand
side. Tighten the left pedal by turning counter-clock-
wise and the right pedal by turning clockwise.
3
