91
Applicable to: Camera mode, Media mode
There are three video output terminals on this camera
recorder.
Choose the most suitable terminal according to the monitor
in use.
*1 :When the component terminal is used, the video terminal of the AV cord
will not be used.
Ⅵ Output is as follows when two or more terminals
are connected at the same time.
●
The [HDMI] terminal always outputs video and audio sound.
●
When both the [COMPONENT OUT] and [A/V OUT]
terminals are connected, video is output from the
[COMPONENT OUT] terminal, while audio sound is output
from the [A/V OUT] terminal.
●
When both the [HDMI] and [COMPONENT OUT] terminals
are connected, the signal selected in the [HDMI Output]
menu instead of the analog component signal set in the
menu is output from the [COMPONENT OUT] terminal.
●
When both the [HDMI] and [A/V OUT] terminals are
connected, video is output from the [HDMI] terminal, and
audio sound is output from both terminals.
Memo :
● Be sure to use the supplied component cable.
● You can specify the following items in the [A/V Out] menu.
[Video Output]: For adjusting the display size on the
monitor. (4:3 or 16:9)
[Display On TV]: For specifying whether to enable on-
screen display.
● When the [HDMI], [COMPONENT OUT] or [A/V OUT]
terminal is connected, video images will not appear on the
viewfinder.
● When the [HDMI], [COMPONENT OUT] or [A/V OUT]
cable is inserted or removed, noise may appear in the LCD
monitor or viewfinder, but this is not a malfunction. It does
not affect the recorded images.
Applicable to: Camera mode
The functions of the camera recorder can be configured
using a wired remote control.
1
Connect a wired remote control to the camera recorder.
Connect the wired remote control (sold separately) to the
[REMOTE] terminal of this camera recorder.
Note :
●
Turn off the power of the camera recorder when connecting
a wired remote control.
2 Turn on the power of the camera recorder.
Viewing Images on a
Monitor
[A/V OUT]
Terminal
: Outputs composite video and audio signals.
[COMPONENT
OUT] Terminal
: Outputs component video signals. Audio sound
is not output. Set the resolution in [Component
Output] of the [A/V Out] menu. (A Page 73)
[HDMI]
Terminal
: Outputs HDMI signals.
Configure the settings in the [A/V Out] menu to
match the monitor to be connected. [HDMI
Output], [HDMI Color Setting], [HDMI Enhance
Setting] (A Page 73)
DC
REC
PUSH
IRIS
SHUTTER
INDEX
T
W
REC
AE
ADJ./ VOL.
P
R
O
G
R
A
M
A
E
Component
Video Input
[HDMI]
[COMPONENT
OUT]
Component
Cable
AV Cord
*1
AV Input
[A/V OUT]
HDMI Cable
(Optional)
HDMI
Wired Remote Control
Connection
REMOTE
Connect the wired remote control
[REMOTE] Terminal
GY-HM150U.book Page 91 Monday, September 5, 2011 1:48 AM
