WARNING
ElectricalShock Or Personal Injury
Hazard
Disconnectelectdcal supply before
servicingor cleaning the unit. Failure
to do so couldresult in electricalshock
or personal injuryfrom cleaner sud-
denly starting.
TO REMOVE LIGHT BULB
Disconnect power cord from electrical out-
let.
Light
Pry light lens
out at slot in
rear as shown
on both sides.
Rotate lens up
and lift off.
Slots
CAUTION
Do not use a bulb rated over 9W (13V).
During extended use, heat from the bulb
could overheat surroundingplastic
Remove the
light bulb by
pulling
straight out.
To Release
To replace
the light
bulb careful-
ly insert fully
into slot.
Note: See PARTS AND FEATURES for bulb
number.
uD ° CAUTION I
otpluginor turnon untilthe vacu-
s completely reassembled.
To replace light
lens, place tabs
at front of lens
into slots. Rotate
lens down and
snap into place.
To maintain efficient cleaning, the agitator
must be kept free of carpet pile, string, or
hair build-up. After every 7 to 10 uses,
unplug and turn vacuum over and check
agitator for string and hair build-up.
Use a scissors to remove any build-up
entangled around the agitator.
17
