12
|
Quick Start Guide
For General Motors
Refer to the section <Removing the hard
rubber frame> (page 14) and then remove
the hard rubber frame.
Cut out accessory 2 to meet the shape
of the opening of the center console.
Attach accessory 2 to the unit.
Accessory2
Cut out to meet the shape of the opening
in the vehicle.
Installing the Escutcheon
For TOYOTA/ SCION
Refer to the section <Removing the hard
rubber frame> (page 14) and then remove
the hard rubber frame.
Cut out accessory 2 as illustrated.
Cutting line
Accessory2
⁄
• When cutting out accessory 2, make sure
it fits the opening of the center console.
Fold double-sided adhesive (accessory
3) along the slit and attach it to
accessory 2 cut-out against the
center rib as illustrated. Use 2 pieces of
accessory 3 for 1 accessory 2 cut-out.
Attach accessory 2 cut-out to the unit.
Accessory3
B59-2069-00_00_2DIN_K_QSG.indb 12 11/01/19 16:46
