KitchenAid KUIS185S Manual

A SERVICE OF

next previous

CUBELET CUTTER GRIDS

i-

9.l/2”-1

h CUBE CUTTER GRID

1%” x 1X” Cube Grid

CHECK OPERATION

v

Start the unit by turning the service switch to

“ON” and opening the line water valve.

If

NOTE: Left is “OFF” - Middle is “ON” - Right

is “CLEAN.” In “CLEAN” position, only the

pump operates.

If

Check condenser fan to make sure it is revolving.

v

Water will not enter pump pan until freezing

plate gets cold and machine goes into a harvest

cycle.

v

Check for even water flow over freezrng plate.

Unit must be level for proper operation.

v

Check for desired cube thtckness and after 24

hours adjust if necessary. Maximum ice yield

will be obtained with Ice thickness at

‘/2”

to 3%“.

v

Replace grill.

Part No. 758842-U

Printed in U.S.A.