. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-34 Preparing for Use with PC
Installing The Calibration (CAL) File
Follow these steps to install the calibration file for use with the DCS 465
Camera Back.
1. Start Microsoft Windows and make sure that you are in the Program
Manager.
2. Insert the diskette labeled “KODAK Professional DCS 465 Digital
Camera Back System Calibration File TWAIN (PC) Format” into your
floppy drive.
IMPORTANT: Make a backup of this diskette; you cannot move images into
your TWAIN application without the CAL file.
3. Open the README file for the installation process by following these
steps:
A. Choose R
UN from the FILE menu.
B. Type
A:\README.TXT (type B:\README.TXT if the diskette is in drive B)
in the command line.
C. Click OK; the file opens.
D. After reading the file, choose E
XIT from the FILE menu; you are
returned to the Program Manager.
4. Continue the installation process by following these steps:
A. Choose R
UN from the FILE menu.
B. Type
A:\SETUP (type B:\SETUP if the diskette is in drive B) in the
command line.
C. Click OK.
D. Wait as the initial screen and then the welcome screen appear.
E. Read the welcome screen and then click C
ONTINUE.
