MAINTENANCE WORK ON CHASSIS AND ENGINE 139
100208-10
– Position oil screen with O-rings.
– Refit plug with O-ring and tighten it.
Specification
Plug, oil screen M20x1,5 15Nm (11.1lbfft)
9.82Filling up with engine oilx
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
100209-10
– Remove filler plug with O-ring from the clutch cover and add engine oil.
Engine oil 1.70l (1.8qt.) Engine oil (SAE 10W/60) ( P. 167)
– Refit plug with O-ring and tighten it.
Danger
Danger of poisoning Exhaust gases are poisonous and can result in
unconsciousness and/or death.
– When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in a closed space.
– Start the engine and check that it is oil-tight.
– Install the engine guard. ( P. 132)
– Check the engine oil level. ( P. 133)
