EN 23
• Press the MENU button to display the main menu. Press the buttons to
select PICTURE and then press the OK button.
• Press the
buttons to select the option you want to adjust in PICTURE menu.
• Press the buttons to adjust each option’s setting.
• Press the EXIT button to exit the menu.
Picture Settings
Picture Mode
Cycles among picture mode: Standard / Mild / User /
Dynamic.
Alternative: you may press the P.MODE button to select
the picture mode directly.
Contrast
Adjusts the difference between light and dark levels in
the picture. (For User mode)
Brightness
Increases or decreases the amount of white in the
picture. (For User mode)
Color Controls the color intensity. (For User mode)
Face Color
You can adjust the face color to your preference
Sharpness
Adjusts the level of crispness in the edges between light
and dark areas of the picture. (For User mode)
Tint
(For NTSC format)
Adjust the balance between red and green levels.
(Tint is only available for NTSC signal input via the
SCART or AV IN.)
Color Temperature
Cycles among color temperature: Medium / Warm /
Cool.Adjusts the color components independently to
achieve a warm or cool. (For User mode)
• Warm: increase red tint
• Medium
• Cool: increase blue tint
Aspect Ratio
Allows you to watch the screen in various picture
formats: 16:9/ Zoom1 / Zoom2 / Just Scan(Only HDMI
Mode) / Auto / 4:3.
Noise Reduction
Reduces the noise level of the connected device:
Middle/ High/ Off/ Low.
PC Setup Adjusts the PC desktop content.
CUSTOMIZING TV SETTINGS
