124
Chapter 7: Replacing print cartridges
13 Gently shake the print cartridge to distribute the
toner evenly.
Note:
Each cartridge is keyed
to fit a specific location on the
carousel. If the cartridge does
not fit, ensure the cartridge is
being placed in the correct
location.
14 Place a new print cartridge onto the carousel.
Your print cartridge has a shutter to protect the pho-
toconductor. Do not move the shutter or touch the
photoconductor (glossy green surface under shut-
ter), it may become scratched or damaged.
The cartridge is installed with the shutter up and
towards the front of the printer.
The edge of the cartridge toward the rear of the
printer must be angled downward for the cartridge
to align with the carousel.
Do not leave the cartridge cover open longer than
necessary. If you expose the photoconductor to light
for more than 10 minutes it may become damaged.
Cover the cartridge if it will be exposed to light for
more than 10 minutes.
Print cartridge handle
