u
Open the water connection.
The temperature is not cold enough.
→
The door of the appliance is not properly closed.
u
Close the door of the appliance.
→
Insufficient ventilation.
u
Clear ventilation grilles.
→
The ambient temperature is too high.
u
Solution: (see 1.2) .
→
The appliance was opened too frequently or for too long.
u
Wait until the appliance reaches the required temperature
itself. If not, contact the customer service. (see Mainte-
nance).
→
Too much fresh food was placed inside without SuperFrost.
u
Solution: (see 5.8)
→
The temperature is incorrectly set.
u
Set the temperature to a colder setting and check after 24
hours.
→
The appliance is too close to a source of heat (stove, heater
etc).
u
Change the position of the appliance or the source of heat.
→
The appliance was not inserted properly into the recess.
u
Check whether the appliance was inserted correctly and
the door closes properly.
8 Decommissioning
8.1 Shut off the water intake*
NOTICE
Malfunction of the water intake!
If the water intake is shut off during operation but the IceMaker
remains in operation, the water intake pipe may ice up.
u
Switch off the IceMaker if the water supply is interrupted
(e.g. holiday).
8.2 Switching off the appliance
u
Press On/Off button
Fig. 2 (4)
for
approx. 2 seconds.
w
The temperature display is dark.
w
If the appliance cannot be switched off, the child
lock function is active (see 5.2) .
8.3 Taking the appliance out of service*
u
Empty the appliance.
u
Put the IceMaker in the cleaning position (see Mainte-
nance).
u
Pull out the power plug.
u
Clean the appliance (see 6.2) .
u
Leave the door open to prevent odour.
9 Disposing of the appliance
The appliance contains some reusable materials
and should be disposed of properly - not simply
with unsorted household refuse. Appliances which
are no longer needed must be disposed of in a
professional and appropriate way, in accordance
with the current local regulations and laws.
When disposing of the appliance, ensure that the refrigeration
circuit is not damaged to prevent uncontrolled escape of the
refrigerant it contains (data on type plate) and oil.
u
Disable the appliance.
u
Pull out the plug.
u
Cut through the connecting cable.
Decommissioning
10 * Depending on model and options
