A SERVICE OF

logo

SIMPLE THERMOSTAT MODE
>> LUXPRO
®
thermostat can also function as a virtual non-programmable thermostat after it has
been switched to a “SIMPLE MODE”.
>> To enable “SIMPLE MODE”,press the reset button (take off the thermostat faceplate and press
the reset button located in the bottom right-hand corner).The message “Touch for simple ther-
mostat” will appear.Touch the screen immediately,and your LUXPRO
®
thermostat becomes a
simplified non-programmable thermostat.
>> “SIMPLE MODE” has the following temperature control modes:
>> “SIMPLE MODE” has the following fan operation modes:
Please note that when entering "Simple Mode" all configurations and settings are stored
permenantly.
>>To revert back to the Programmable LUXPRO
®
thermostat, simply press the reset button and
touch the screen when the message “Touch for Programmable Thermostat”appears.
38 LUXPRO
®
PSPU721T