Tastatur (48 Tasten) (Not Translated) 21
E-EQ-MX2OGDE-F-ARC MX2 Benutzerhandbuch
The MX2 with 48-key keypad has a few keys that are not found on a standard computer keyboard.
These keys are shown in the following table:
Key Default Use
Power key. Turn the unit on and off.
Backlight key. Turns the backlight on and off in
the display.
FN key. Outputs the symbol or activates the
function (F6 - F10) above the next key pressed.
Contrast Up key. Increases the contrast of the
display.
Contrast down key. Decreases the contrast of the
display.
Note: There is no Scan key on the 48-key keypad.
Repeating Keystrokes
The 48-key keypad supports repeating keystrokes:
• Press and hold the desired key to repeat a keystroke.
• After a brief delay, the keystroke is automatically repeated until the key is released.
DOS Key Functions Not Available on the MX2
Prnt Scrn A function that is available at the DOS prompt on a desktop PC. The Prnt Scrn as a
system function requires a parallel port and the MX2 has only serial ports.
Sys Req A function that is available at the DOS prompt on a desktop PC. Sys Req is for use
in a multi-tasking environment to switch between various running applications. The
MX2 is not a multi-tasking computer, nor is DOS in general considered a multi-
tasking environment.
