ENGLISH
33
❖ Lamp Life
Display the remaining lamp life by pressing the INFO. button on the remote controller.
Notes:
• The maximum life limit of the lamp is 2,000 hours. Although we care very much about quality, the lamp can rarely breaks down if
running time exceeds 1,000 hours. Therefore we recommend to replace the lamp if Lamp Life gets under 1,000 hours. The lamp
cannot be used exceeding the maximum life limit.
• This product is checked under strict quality control when it is shipped out form factory.
“Total Hours” in the menu includes the time for this check. So “Total Hours” may not be 0 hours when it is used first time.
– When the lamp life becomes less than 100 hours and the unit is still on, the remaining lamp life is displayed on the screen
automatically.
– When the lamp life becomes less than 5 hours, the remaining lamp life is displayed on the screen .
To clear the warning, press the MENU button.
– Approximately 2 minutes after the lamp reaches the end of its lamp life, power to the projector shuts OFF and the WARNING
indicator lights up a red color. If the below message appears on the screen and power shuts OFF soon thereafter, promptly
replace the lamp with a new one. (See “Replacing Lamp Unit”
☞
P.34)
PAT T.
DYNA.
