A SERVICE OF

logo

Maxtor Atlas 10K V I-4
Reed-Solomon ECC 2-3
references 1-3
Relative Addressing 5-23, 5-90, 5-93
RELEASE Command 5-104, 5-105
reliability 2-3, 4-10
Remote Busy and Fault Displays (16-bit
Drives, except SCA)
3-9
REQUEST SENSE Command 5-106, 5-
107, 5-108, 5-132
Reservation Identification 5-104, 5-105,
5-124
RESERVE Command 5-124, 5-125
reset 4-5
Response Data Format 5-23
Retry Count 5-122
Returned Logical Block Address 5-93
REZERO UNIT Command 5-127
Rigid Disk Geometry 5-67, 5-68
Rigid Disk Geometry Page 5-67
Rotational Offset 5-68
rotational speed 4-1
RPL Status Change 5-110
S
SCSI configurations 2-1
SCSI ID bits 3-8
SCSI interface configurations 3-3
SCSI-2 specification 1-3
SEEK (10) Command 5-129
SEEK (6) Command 5-128
Segment Number 5-110
SEND DIAGNOSTIC Command 5-130
Sense Data Availability 5-108
Sense Key 5-20, 5-110, 5-111, 5-112, 5-
121, 5-122
Sense Key Information Field Contents 5-
112
Sense Keys 5-111
sequential switch times 4-4
sequential throughput 4-2
shipping container 3-4
shock 4-10
Shock Feet 3-4
space requirements 3-3
specifications 4-1, 4-10
spindle startup 4-6
Standard Inquiry Data 5-22, 5-23
Standard Inquiry Data Page 5-22
start/stop 4-10
Starting Boundary 5-51
Status Reporting 5-109
Status/Error Reporting 5-7
Supplied Format 5-103
supply voltage 4-5
Supported Additional Sense Codes 5-109,
5-113
Supported Diagnostic Page List 5-130, 5-
131
Supported Diagnostics Page 5-102
Supported Diagnostics Pages 5-102
Supported Sense Keys 5-111
SURF 5-66
SYNCHRONIZE CACHE Command 5-
134
Synchronous Data Transfer 5-23
T
TARGET TRANSFER DISABLE 5-23
temperature 4-8
terminology 1-2
TEST UNIT READY Command 5-135
Third Party Device ID 5-104, 5-105, 5-
124, 5-125
timing specifications 4-4
total tracks 4-1
total user sectors 4-1
Track Skew Factor 5-66
tracks density 4-1
Transfer Length 5-11, 5-47, 5-89, 5-90,
5-99, 5-137, 5-138, 5-139, 5-142
transferred data 4-4
transient voltages 4-5
Translate Address 5-101, 5-102, 5-103,
5-130, 5-131
Translate Address Page 5-101, 5-102, 5-
131
Translate Format 5-103
typical specifications 4-4
typographical conventions 1-3