A SERVICE OF

logo

Open as PDF
next previous
1. The dimension of each pipe part is G1/2.
2. Connection of one-way safety valve:install the one-way safety valve
attached with the machine at the water inlet of the main machine.(Pay
attention to keep the installed drainage flexible pipes of the safety valve
sloping downward and connected with the atmosphere.)
3. In order to avoid leakage when connecting the pipelines, the rubber
seal gaskets provided with the machine must be added at the end of
the threads (see Fig.3).
4. If the users want to realize a multi-way supply system, refer to the method
shown in Fig.4 for connection of the pipelines.