Drying heat
In all programmes the drying process is
assisted by the heating element. Drying
heat is set as activated at the factory.
Switching the heating elements off dur
-
ing drying will save approx. 0.1 kWh in
electricity. The dishes are then dried
with residual heat. Open the dish
-
washer door at the end of a programme
to allow the dishes to dry better.
Activation/Deactivation of drying
heat
^ Open the door.
^ Switch the dishwasher off using the
"Off" button (16).
^ Press the a and c buttons in and
whilst doing so
switch the dishwasher
on using the "On" button.
^ Then release these buttons.
The "Salt" and b indicator lights will
flash.
If this is not the case the process must
be repeated.
Drying heat is switched on if:
–
the a indicator light is not lit up
Drying heat is switched off if:
–
the a indicator light is lit up
^
Press the a button to change the
setting.
Depending on the previous setting the
a indicator light will either come on or
go out.
^
Press button f twice.
^ Switch the dishwasher off using the
"Off" button.
The change is now stored in memory.
Operating the dishwasher
34
