3. TV Connections 21
Figure 9. Connecting a VCR to an Antenna or Wall Outlet Cable
065
7*%&0
065
7*%&0
*/
*ODPNJOH
$BCMF
"6%*0
065
"6%*0
*/
*/
"/5&//"
-
-
3
3
COMPONENT 1
Y Pb Pr (480i/480p/720p/1080i)
COMPONENT 2
RECORD
OUTPUT
OUTPUT
DIGITAL
IR EMITTER
NetCommand
RS-232C
AUDIO
INPUT 1
INPUT 2
HDMI
VIDEO: 480i / 480p / 720p /
1080i / 1080p
W-SVGA, XGA, W-XGA,
AUDIO: LINEAR PCM
PC: VGA, W-VGA, SVGA,
1 (LEFT) ,, 2 (MIDDLE) 3 (RIGHT)
DVI / PC
VIDEO
AUDIO-
AUDIO-
RIGHT
LEFT
L (MONO)
INPUT
AVR
AUDIO
AUDIO
OUTPUT
S-VIDEO VIDEO - AUDIO - R
L (MONO)
- AUDIO - R
Y Pb Pr
EMITTER
3D GLASSES
SXGA / 720p / 1080p
IEEE 1394
ANT 2 / AUX
ANT 1 / MAI
N
RECORD
OUTPUT
AUDIO-
AUDIO-
RIGHT
INPUT 2
L (MONO)
S-VIDEO VIDEO - AUDIO - R
LEFT
ANT 1 / MAIN
*/
065
065
B
B
C
C
VCR to an Antenna or Wall Outlet Cable
Required: Two-way RF splitter, two coaxial cables, right
and left analog audio cables, either S-video or video
cable.
1. Connect the incoming cable or antenna to
IN
on the
RF splitter.
2. Connect one coaxial cable from
OUT
on the RF
splitter to
ANTENNA IN
on the VCR back panel.
3. Connect one coaxial cable from
OUT
on the RF
splitter to
ANT 1/MAIN
on the TV back panel. This
connection also allows you to use the TV Guide On
Screen and Split Screen features.
4. To use the TV speakers with the VCR, connect left
(white) and right (red) audio cables from
AUDIO OUT
on the VCR to
INPUT AUDIO L (MONO)
and
AUDIO
RIGHT
on the TV back panel. If your VCR is mono
(non-stereo), connect only the white (left) cable.
5. Connect either an S-Video or composite video
cable from
VIDEO OUT
on the VCR back panel to
INPUT VIDEO
or
S-VIDEO
on the TV back panel.
Connect only one type of video cable; S-Video is
recommended, if available.
Optional
Perform these two additional steps to:
• Use the TV Guide On Screen recording feature
• Record high-definition digital channels con-
verted to analog standard-definition video and
analog stereo audio
6. Connect left (white) and right (red) audio cables
from
AUDIO IN
on the VCR to
RECORD OUTPUT
AUDIO LEFT
and
AUDIO RIGHT
on the TV back
panel. If your VCR is mono (non-stereo), connect
only the white (left) cable.
7. Connect a composite video cable from
VIDEO IN
on
the VCR back panel to
RECORD OUTPUT VIDEO
on
the TV back panel.
