– 10 –
▲
<Using Ventilation>
On Mr. Slim models
● To run the ventilator together with the indoor unit:
■ Press the ON/OFF button 1.
• The Vent indication appears on the screen (at 8). The ventilator will now
automatically operate whenever the indoor unit is running.
● To run the ventilator independently:
■ Press the Mode button 2 until
appears on the display. This will cause the
ventilator to start.
● To change the ventilator force:
■ Press the Ventilation button 8 as necessary.
• Each press toggles the setting, as shown below.
▲
Low High
On CITY MULTI models
● To run the ventilator together with the indoor unit:
■ Press the ON/OFF button 1.
• The Vent indication appears on the screen (at 8). The ventilator will now
automatically operate whenever the indoor unit is running.
● To run the ventilator only when the indoor unit is off:
■ Press the Ventilation button 8 while the indoor unit is off.
• The On lamp (at 1) and the Vent indication (at 8) come on.
● To change the ventilator force:
■ Press the Ventilation button 8 as necessary.
• Each press toggles the setting, as shown below.
(Low) (High)
▲
▲
▲
No display
(Stop)
(OFF)
Note:
● With some model configurations, the fan on the indoor unit may come on even when
you set the ventilator to run independently.
