5
Using easy
Helps Industry
Save Costs
HGV cooling system:
• Operating temperature range -25 °C to +55 °C of all
the easy devices enables them to be used directly in
outdoor installations, on vehicles, etc.
• easy is particularly cost efficient: it can do without the
keypad and display window and then costs less. Here
an LED signals the operating status. The easy circuit
diagrams are used in all easy devices, whether or
not they have a display window.
•Temperature, pressure, etc. can be recorded via analog
inputs.
• Devices mounted by fitting onto top-hat rail,
or by screw fixing using the mounting brackets.
Machine control:
•Plug-in memory module enables duplication of easy
circuit diagram without a PC. Any subsequent changes
to the circuit diagram which may be necessary, can be
undertaken off-site, the memory module sent to site
and the modifications read into the easy there.
• Adjustable start-up behaviour (RUN or STOP), which
then governs the operating mode when the power
is switched on, facilitates commissioning.
• Detection of short circuits and selective disconnection
of the transistor outputs in the event of short circuit or
overload.
Container control:
• Straightforward and economic communication over
distances of up to 1000 m via the built-in NET interface.
• Up to 32 status and indication texts can be displayed,
each with several variables, in a back-lit window,
for example to compare setpoint and actual values
for fill levels, run times, etc.
• Application variable, due to presetting of various
mixing and running times via direct parameter input
into the device.
ea y
s
CONTAINER
50%
FILLED
510 0006
DIR
CNT C1
RES +
