English
Problems Points to check with possible solutions
14.Cursor position is not correct. /
Cursor jumps.
When cursor position is incorrect or cursor
jumps, turn off and on the monitor.
xThe drawing touch (touch operation with
dragging the finger on the touch panel) to
draw the picture may cause incorrect cursor
position.
xChanging the position or angle of the
monitor while the monitor operation will
cause cursor jump.
xKeep metals away from the panel surface.
xPoint and touch with one finger only. Keep
other fingers away from the touch screen.
Do not rest the hand in the monitor or bezel
while touching the screen.
xDo not touch the screen while the computer
is starting. Touch the screen after
disappearing TouchWare starting window.
xDo not touch the screen while turning on the
monitor. Touch the screen 5 seconds later
after appearing the image.
xTouch the screen 5 seconds later after
connecting the USB cable.
xThe spray for preventing static electricity
may influences the sensibility of the touch
panel. Do not use it on cleaning.
30 6. TROUBLESHOOTING
