A SERVICE OF

logo

English
14 2. CABLE CONNECTION
[Signal selection]
Please use the signal select button on the front panel.
(1) The selection menu appears by pressing the button for more than 2 seconds.
(2) Choose “Monochrome” by up and down keys.
ENTERAUTO
SIGNAL
1 - 2
Digital Input
Signal Cable Connector PC
Signal Cable (FD-C04 enclosed)
Video Output
Connector DVI
Monochrome digital graphics
board
NOTE
Only TMDS DATA1 (Green) of video signal data is displayed.
The monitor is not compatible with a color digital graphics board.
2. Plug the power cord into the power connector on the rear of the
monitor.
3. Lead the power cord and signal cable into the cable holder at rear of
the monitor.
NOTE
The cables are recommended to lead with slight sag for the smooth motion of
the stand.
Si
g
nal selection button
(
Color / Monochrome
)