22
Basic Steps for Shooting and Playback
Step 1 Turn the Camera On
1 Press the power switch to turn on the camera.
• If you are turning the camera on for the first time,
see “Setting Display Language, Date and Time”
(A 24).
• The monitor will turn on.
2 Check the battery level indicator and the number of exposures
remaining.
* The indicator is not displayed when projecting slide shows or playing back files from a
connected device.
Number of Exposures Remaining
The number of pictures that can be stored is displayed.
• If a memory card is not inserted, C is displayed to indicate that pictures will be saved
in the camera’s internal memory (approximately 94 MB).
• The number of exposures remaining varies depending on whether you are using the
camera’s internal memory or a memory card, and also varies depending on the image
quality and image size (image mode) setting (A 62).
• The number of exposures remaining shown in the illustrations may differ from the
actual display.
Battery level
indicator
Description
b* Battery level high
B Battery level low. Prepare to charge or replace the battery.
N
Battery
exhausted.
The camera cannot take pictures. Charge or replace the battery.
1100
29㹫s
Battery level indicator
Number of exposures remaining
