51
Shooting Features
Using the Self-timer
The camera is equipped with a self-timer that releases the shutter about ten seconds or two
seconds after you press the shutter-release button.
Set Vibration reduction to Off in the setup menu (A78) when using a tripod to stabilize
the camera during shooting.
1 Press the multi selector J (n).
2 Select n 10s or n 2s, and press the k
button.
• n 10s (ten seconds): Use on important occasions, such as
weddings.
• n 2s (two seconds): Use to prevent camera shake.
• If a setting is not applied by pressing the k button within
a few seconds, the selection will be canceled.
• When the shooting mode is Pet portrait scene mode,
Y(pet portrait auto release) is displayed (A39). The self-timer cannot be used.
3 Frame the picture and press the
shutter-release button halfway.
• Focus and exposure are set.
Self-timer
10
F3.3
1/250
