
Technical Notes and Index
F11
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Refer to the page numbers in the right-most column for more information.
• See “Error Messages” (E92) for more information.
Power, Display, Settings Issues
Problem Cause/Solution A
The battery
inserted in the
camera cannot be
charged.
• Confirm all connections.
16,
18
The battery cannot
be charged by
connecting the
camera to a
computer.
•Off is selected for Charge by computer in the setup menu.
• When charging by connecting the camera to a computer,
battery charging stops when the camera is turned off.
• When charging by connecting the camera to a computer,
battery charging stops when the computer is suspended
(sleeping), and the camera may turn off.
• Depending upon computer specifications, settings, and status,
charging the battery inserted in the camera may not be
possible via computer connection.
102, E80
E80
E80
–
Camera cannot be
turned on.
• Battery is exhausted.
• The camera cannot be turned on while connected to an
electrical outlet via the Charging AC Adapter.
20
16
Camera turns off
without warning.
• Battery is exhausted.
• If no operations are performed for a while, camera has turned
off automatically by auto off to save power.
• The camera turns off if the Charging AC Adapter is connected
while the camera is on.
• The camera turns off if the USB cable connecting it to a
computer or printer is disconnected. Reconnect the USB cable.
• Inside of the camera has become hot. Leave the camera off
until the inside of the camera has cooled.
• At low temperatures, the camera and the battery may not
function normally.
20
21
16
82, 85,
E26
–
F3
Monitor is blank.
• Camera is off.
• Battery is exhausted.
• Standby mode for saving power: Press the power switch,
shutter-release button, c button or b (e movie-record)
button, or rotate the mode dial.
• When flash lamp flashes, wait until flash has charged.
• Camera and computer are connected via USB cable.
• Camera and TV are connected via audio/video cable or HDMI
cable.
21
20
21
60
82, 85
82, E23