0502S20005 4-2
Setting the “Optional” Digital Timer (Continued)
To increase the timer setting push and hold the “+” button for 5 seconds. The timer will
beep after which each push and release of the button will advance the setting
1 second. If you continue to hold the button after the initial beep the timer will begin to
advance rapidly. The decrease function of the timer works in the same manner except
you must press and hold the “-” button.
Once set, the timer can be used by following this simple procedure. Place the product
on the grill and push the “Start/Stop” button. The timer will begin counting down and will
begin beeping when the set time has expired. The timer will continue to beep until you
again press the “Start/Stop” button. Once the button is pressed the timer will reset itself
to last time to which it was set. It will continue to repeat this setting even if the unit is
turned off or unplugged until you purposely change it.
Setting the “Optional” 4 Menu Digital Timer
To enter time programming from the blank “--:--“ screen, press and hold the PROGRAM
button for 3 seconds. The display will now show “PROG”. To change a time on one of
the four timers, press the desired timer button. The display will now change to the
existing set time. Now press the “+” or “-“ button to change to the desired time. To
change another timer, press that particular timer button and follow the same procedure.
To exit the time programming mode, press the PROGRAM button and the timer will
return to the operating mode with the blank display of “--:--“.
To cancel a timer that is on, press and hold that particular timer’s button until it resets.
To view the time remaining on a particular timer, press the SCAN button. Continue to
press the SCAN button to toggle through all active timer times.
Rev. 8/16/06
