OMEGA Model CYD201/CYD208 User’s Manual
Operation 3-1
CHAPTER 3
OPERATION
3.0 GENERAL
This chapter covers the Units Key (Paragraph 3.1), the Channel key
(Paragraph 3.2), Scan Mode (Paragraph 3.3), Setting Dwell Times
(Paragraph 3.4), Alarm Operation (Paragraph 3.5), SoftCal™
Compensations (Paragraph 3.6), Calibration (Paragraph 3.7), Verifying
SoftCal™ Operation (Paragraph 3.8), and Erasing SoftCal™
Compensations (Paragraph 3.9).
UNITS
ON
OFF
CYD201 THERMOMETER
K
V
°C
°F
Figure 3-1. Model CYD201 Front Panel
CHANNEL
UNITS
ON
OFF
CYD208 THERMOMETER
K
V
°C
°F
Figure 3-2. Model CYD208 Front Panel
3.1 UNITS KEY
UNITS selects different units of measurement. The thermometer reads in
voltage or temperature (°C, °F, or K). Press
UNITS
to scroll through the
various selections.
UNITS
also determines if SoftCal™ is active. Press and hold
UNITS
for
3 seconds. If SoftCal™ is not active, -000- appears in the display.
