Omron SC100 Manual

next previous

bATTERy INSTALLATION

BATTERY PLACEMENT

Beforeusingthisscaleforthersttimeyoumustrstinstalltheenclosedbattery.You

willneedtopulloutthebatteryinsulationlmwhenyouinsertthebatteryfortherst

time.

1. Open the battery cover.

2. Put one 3V lithium battery into the battery box

(positivepoleupward)andthentightlyclosethe

battery box.

NOTE:

When installing the battery, please do not press the base

of the scale, it may cause an inaccurate measurement.

If this happens, reinstall the battery or place the scale on

aatsurfaceforatleast20minutesbeforeyoutakethe

measurement again.

WHEN YOU INSTALL THE BATTERY FOR THE FIRST TIME

1. This is what the display looks like after initial battery placement.

2. After1-2secondsthedisplaywillreturntozero.

3. Placethescalehorizontallyonaatsurface.

The power turns off after the scale displays the

valueautomatically(Note:thevalue1.5is

forinstance)