37
En
You can set the volume when using headphones.
■ Operating with the remote controller
■ Operating on the integrated amplifier
Tip
• The default level is 0.
Note
• The integrated amplifier will end the setup if there is no
operation for 8 seconds.
Setting the Headphone Level
1
Press SETUP.
2
Press / repeatedly to select “HPLVL”.
3
Press ENTER.
The current level is displayed.
4
Press / repeatedly to adjust the offset level.
You can adjust the offset level from -12 dB to +12 dB
in 1 dB steps.
The setting is automatically confirmed.
5
Press RETURN repeatedly to exit the setup.
SETUP
/ / /
ENTER
RETURN
1
Press SETUP repeatedly to select “HPLVL”.
2
Use the INPUT selector to adjust the offset level.
First, the current level flashes on the information
display. Then, the value is adjusted.
The setting is automatically confirmed.
3
Press SETUP repeatedly to exit the setup.
SETUP
INPUT selector
