En-29
Listening to the Radio—Continued
Displaying Radio Text (RT)
When tuned to an RDS station that’s broadcasting text
information, the text can be displayed.
Use the [DISPLAY] button to display RT.
The RT information scrolls across the display.
Notes:
• The message “Waiting” may appear while the receiver
waits for the RT information.
• If the message “No Text Data” appears on the display,
no RT information is available.
Finding Stations by Type (PTY)
You can search for radio stations by type.
1
Use the [DISPLAY] button to display PTY.
The current program type appears on the display.
Note:
If you tuned to another station than RDS, “Not
RDS” will appear.
2
Use the PRESET []/[] buttons to select
the type of program you want.
See the table on page 28.
Note:
If you don’t press the buttons for 3 seconds, the
display will return to the previous display.
3
To start the search, press [ENTER].
The receiver searches until it finds a station of the
type you specified, at which point it stops briefly
before continuing with the search.
4
When a station you want to listen to is
found, press [ENTER].
If no stations are found, the message “Not Found”
appears.
DISPLAY
