34
Controlling an Onkyo DVD player
DVD
operation
buttons
OSD
operation
buttons
DVD
Using remote controller
You can operate the z-connected Onkyo DVD player, CD player or cassette tape deck with the remote controller provided with the
TX-SR500/TX-SR500E. The graied buttons in the illustration operates the TX-SR500/TX-SR500E in any mode. The RC-478M remote
controller is for USA and Canadian models, and the RC-479S remote controller is for other models.
The z connector of the Onkyo DVD player must be
connected to the TX-SR500/TX-SR500E (refer to
page 16).
1. Press DVD.
2. Press to turn on the Onkyo DVD
player.
3. Press the desired operation button.
DVD operation buttons
s : Starts playback of DVD.
e : Stops playback.
f : Searches the disc in the forward
direction.
d : Searches the disc in the reverse
direction.
2/8 : Lets playback pause temporarily or
advances the disc frame by frame.
w : Starts playback from the beginning of
the next chapter/track.
q : Starts playback from the beginning of
the current chapter/track.
DISC : This button is valid when the DVD
changer is used and selects the disc to
be played.
1–9, +10, 0 :
Use to enter numeric values.
OSD operation buttons
TOP MENU : Displays the top menu of each DVD
disc.
MENU : Displays a menu recorded in the
DVD disc.
RETURN : Returns to the previous menu.
SETUP : Displays the setup menu.
5/∞/2/3 : Selects an item in a menu.
ENT : Enters the selection in memory.
DVD
operation
buttons
OSD
operation
buttons
DVD
RC-478MRC-479S
